I am Ready to code testflight for application To Test and review Thanks to all developers

Facial recognition is not working with the glasses. I tried to do a new recognition with the glasses, and it's giving a direct error. Is anyone having the same problem?

I recently update version 26 Beta 2 , 3 can't working screenshot & Dont have split screen iphones

Visual Studio 2022 is attempting to use port 11000 instead of 62078, but the port on iOS 18.5 is not listening for VS's Hot Reloading. Is this allowable? If so, how?

Apple's Wi-Fi Aware demo shows that pairing is required before establishing a connection. Is this pairing mandatory? Can Android devices pair with Apple devices? My Android device strictly supports Wi-Fi Aware 4.0 and I want to achieve interoperability with Apple devices.

As the title states, and it’s extremely frustrating. The floating bar that now appears above the keyboard is cool compared to the built in bar, though it seems to only work when it feels like it. Also the screen seems to have a haze around it, sometimes I cannot read whats needed because of it being blurred and it won’t allow me to navigate to certain things due to the haze being there too. Any way of rolling back my update and going back to my previous iOS?

An update to my app has been rejected under Guideline 2.1 - Performance - App Completeness, citing that only a blank screen appeared on launch. I cannot recreate this bug. I have, on this exact device and iOS version that the reviewer used (iPhone 13 mini, iOS 18.5): Downloaded the app from TestFlight and successfully launched Launched in release mode Launched as a new install AND as an upgrade Launched with no internet, good internet and slow internet I have asked the reviewer for any crash logs and more detail about the testing setup that led to this blank screen on launch, and no extra information was provided at all, just another screenshot of the launch screen. Where do I go from here? Any advice would be hugely appreciated.

Updated iPhone to 26 beta 2, everything is ok but battery, battery is changed, not original. My phone can't charge higher than 1% and turns off every 5 minutes, even connecting to wireless charger and cable at the same time don't work, restored iPhone thru iTunes.I hope I will be able to install new beta without any problems because loving the new design, hoping for the best. Thanks. My FB-FB18327769

Updated iPhone to 26 beta 2, everything is ok but battery, battery is changed, not original. My phone can't charge higher than 1% and turns off every 5 minutes, even connecting to wireless charger and cable at the same time don't work, restored iPhone thru iTunes.I hope I will be able to install new beta without any problems because loving the new design,hoping for the best. Thanks.

We’ve encountered a reproducible issue where the iPhone fails to reconnect to a Wi-Fi access point under the following conditions: The device is connected to a 2.4GHz Wi-Fi network. A Bluetooth audio accessory is connected (e.g. headset). AVAudioSession is active (such as during a voice call or when using the Voice Memos app). The user moves away from the access point, causing a disconnect. Upon returning within range, the access point is no longer recognized or reconnected while AVAudioSession remains active. However, if the Bluetooth device is disconnected or the AVAudioSession is deactivated, the Wi-Fi access point is immediately recognized again. We confirmed this behavior not only in my app but also using Apple's built-in Voice Memos app, suggesting this is not specific to our implementation. It appears that the Wi-Fi system deprioritizes reconnection while AVAudioSession is engaged. Could this be by design? Or is this a known issue or limitation with Wi-Fi and AVAudioSession interaction? Test Environment: Device: iPhone 13 mini iOS: 17.5.1 Wi-Fi: 2.4GHz band Accessories: Bluetooth headset We’d appreciate clarification on whether this is expected behavior or a bug. Thank you!

Hello, I'm working on a iOS project, and I added a setup precedure to save and load configuration files during the app's initialization process. However, I can't find my files in my iPhone test while it's Ok on my Mac. How can I retrieve them? Thanks

Hello there! I have developed a website (https://finnia.ch). Now I have transformed it to an app (with webview). If anyone would like to check it out and test it here is the link: https://testflight.apple.com/join/hmyDw74t It is a administration tool (not a game). Simon

I'm pretty excited for the all new iOS 26 redesign, but what I'm most excited for is the call screening feature to avoid unwanted calls. I downloaded the developer's beta on my secondary device to report bugs, but call screening doesn't work on it even though it's turned on. I already sent a feedback report, but I'm not sure if it's just a beta bug or that my iPhone won't support it. I haven't found much info about it. It's a 2nd gen SE. Thanks.

It’s very annoying but on my iPhone 12 Pro I keep getting the accessibility app with the microphone on and it keeps opening the app by itself and it’s a blank screen and every time I close it it just reopens. I don’t know why it keeps doing this, but it drives me crazy. Does anyone know what else to do? I also have the beta iOS 26 but it’s been doing this even with the past update.

been testing out ios 26 since it came out and now all of a sudden everytime it boots only into recovery and wont do anything else. recovery says no known issues found.

I set iOS 26 to install overnight, put my iPhone 16 Pro on the MagSafe charger, watched it charge just fine, and went to sleep. When I woke up the iPhone showed the “plug into power” dead battery screen. I took it off MagSafe and put it back on. A half hour later the phone was warm but still wouldn’t power on, just showed the battery screen with a little red in it. I took it off MagSafe and plugged it into my iPad charging brick with USB cable to give it more power, still it did not turn on. I tried holding all the buttons to try to force a restart but didn’t work. For anyone else encountering this, do this to enter DFU mode and restore it. I had to do it a few times before I got the timing right. Plug into your Mac and open Finder (or apparently a PC with Apple Devices or iTunes) Press and quickly release volume up Press and quickly release volume down Press and hold right side button When the battery disappears and screen goes black, hold volume down and continue holding side button After a couple seconds release the side button and continue holding volume down A prompt to allow connecting to the iPhone should appear after a couple seconds, click Allow, and it’ll say the iPhone entered DFU mode - proceed to restore the firmware

I have an iPhone 14 Pro. I downloaded the iOS 26 beta and had a SERIOUS error, rendering the phone unusable. I charged it to 60% and kept it plugged in while updating. While updating, I restarted several times at the Apple logo, then at the Welcome screen, and it had quite a few bugs with low battery warnings. When I turned it on, I noticed I had 1% (I thought it was strange). When it was plugged in, it wouldn't charge; it only had 1% left, and it also restarted every 2 minutes. Off-plugged, it did exactly the same thing. In the end, I had to go back to iOS 18.5; I had no problems with this version.

Hi! Just downloaded the IOS 26 beta software to my Iphone 15 128gb and during the second phase of installation of the update (when the phone start rebooting a few time) my iphone showed the display of low battery with the time displayed on the top left corner of the screen, even though my Iphone was pluged in during the full time of the install and had more than 50% of battery before launching the installation. So far-here is what i know: I wouldn't be able to confirm if the install was successfull or not i tried forced reboot a few time but i keep landing on the low battery page some other people are experiencing the same problem as i am as i could confirm on the reddit dedicated to the IOS26beta page

I have an older Macbook, and it only supports Xcode 15.2, and I want to be able to work with my iPhone SE 3rd gen, which currently has the iOS 26 beta on it. Is there a place I can find the download for that, and can I even run it on that version of Xcode? If not, can I download a newer version of Xcode on MacOS Ventura?

I'm working on a ble connected device that use ancs and system clock to receive alarm notification events for earing impaired people. It used to work until iPhone 13 with latest iOS 18.x. Starting with iPhone 14 onward (iOS 18.x), system clock alarm notification is not sent anymore. Is There any reason for this to happening?. Is anyone aware of this behaviour? Any suggestion would be really appreciated. Cheers