StoreKit2 Repro Notes: the latest renewal appears in Transaction.unfinished after restore (2026-04-05) 1. Issue Summary In the current project, during a normal cold launch: Transaction.latest(for:) returns a value for the weekly subscription Transaction.all returns the full subscription history chain Transaction.unfinished is empty However, after tapping Restore Purchases and calling AppStore.sync(), one "latest renewal" transaction appears in Transaction.unfinished. This behavior looks more like a system-side replay triggered by AppStore.sync() than a consistently unfinished transaction during a normal launch. 2. Affected Product Product: do.i.iapc.vip.week Transaction chain characteristics: All transactions belong to the same auto-renewable subscription chain originalTransactionID = 2000001143446796 The transaction that appears in unfinished is usually the latest or last renewal in the chain 3. Current Code Path During app startup: loadProducts() Debug snapshot for Transaction.latest(for:) Debug snapshot for Transaction.all Scan Transaction.unfinished refreshEntitlements() During restore purchases: Call AppStore.sync() Scan Transaction.unfinished refreshEntitlements() 4. Preconditions A Sandbox test account is used The weekly subscription do.i.iapc.vip.week already has multiple historical renewal transactions The subscription is already expired, so entitlements = 0 during a normal launch The issue is easier to reproduce on an iOS 26.4 device The issue was not consistently reproduced on another iOS 18.2 device 5. Reproduction Steps Path A: Normal cold launch Launch the app Observe the logs: LatestTransaction snapshot AllTransaction snapshot summary unfinished processing result Observed result: latest has a value all contains the full history chain unfinishedHandledCount = 0 Path B: Tap Restore Purchases Launch the app Tap Restore Purchases Trigger AppStore.sync() Observe the logs: restore started unfinished processing started unfinished transaction received Observed result: After restore, one "latest renewal" transaction appears in unfinished That same transaction does not necessarily appear during a normal cold launch 6. Expected Result If a transaction has already been successfully finished in the past, it should not appear again as unfinished after Restore Purchases. A stricter expectation is: During a normal cold launch, unfinished = 0 After tapping Restore Purchases, unfinished should still remain 0 7. Actual Result Actual behavior: Normal cold launch: unfinished = 0 After Restore Purchases: one "latest renewal" transaction appears again in unfinished This suggests that AppStore.sync() may replay the most recent historical subscription transaction. 8. Current Assessment Based on the current logs, the issue is more likely to be: Related to AppStore.sync() / StoreKit / Sandbox replay behavior on the system side Easier to reproduce on iOS 26.4 Less likely to be caused by a persistent app-side bug where finish() is missed during a normal startup flow Reasons: During a normal launch, unfinished = 0 The behavior is inconsistent across devices and OS versions, even with the same Sandbox account latest, all, and unfinished can be clearly separated during a normal cold launch 9. Suggested Engineering Position Suggested wording for internal or external communication: In the iOS 26.4 + Sandbox environment, calling AppStore.sync() may cause StoreKit to replay the latest historical subscription transaction into Transaction.unfinished. Since the same transaction does not necessarily appear during a normal cold launch, the issue currently looks more like a system/environment-specific behavior difference than an app-side bug where finish() is consistently missed during the regular startup path. 10. Additional Evidence That Can Be Collected If this needs to be escalated to the team or to Apple, the following would strengthen the report: Full log comparison before and after tapping Restore Purchases The same transactionId compared between normal launch and post-restore behavior Cross-device comparison on different iOS versions A minimal reproducible sample project and Sandbox test record

Summary I'm implementing NEURLFilter with the com.apple.developer.networking.networkextension.url-filter-provider entitlement for a system-wide URL filtering feature. The feature works perfectly in development-signed builds (connecting successfully to my PIR server over extended testing) but every production-signed build fails before any network call is made. NEURLFilterManager reports .serverSetupIncomplete (code 9). After installing the NetworkExtension debug profile, the unredacted com.apple.CipherML logs reveal the cause: no privacy proxy is provisioned for this bundle identifier, and the connection is configured proxy fail closed. Environment iOS 26 Entitlement: com.apple.developer.networking.networkextension.url-filter-provider Extension point: com.apple.networkextension.url-filter-control PIR server configured via NEURLFilterManager.setConfiguration(...) Privacy Pass issuer configured Dev-signed builds: working correctly, connecting to the PIR server Production-signed builds (both TestFlight and distribution): failing identically The Error Chain Surfaced to the app via NEURLFilterManager.lastDisconnectError: NEURLFilterManager.Error.serverSetupIncomplete (code 9) ← NEAgentURLFilterErrorDomain Code 3 ← com.apple.CipherML Code 1100 "Unable to query status" ← com.apple.CipherML Code 1800 (error details were logged and redacted) After installing the VPN (NetworkExtension) debug profile, the unredacted com.apple.CipherML subsystem shows: queryStatus(for:options:) threw an error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo={ _NSURLErrorNWPathKey = satisfied (Path is satisfied), interface: en0[802.11], ipv4, dns, uses wifi, LQM: good, NSErrorFailingURLKey = https://<my-pir-server>/config, NSUnderlyingError = { Error Domain=NSPOSIXErrorDomain Code=50 "Network is down" }, _NSURLErrorPrivacyProxyFailureKey = true, NSLocalizedDescription = "The Internet connection appears to be offline." } The critical diagnostic line in the com.apple.network subsystem is: nw_endpoint_proxy_handler_should_use_proxy Proxies not present, but required to fail closed And the connection setup shows the proxy fail closed flag is mandatory for the connection: [C... ... Hostname#...:443 quic, bundle id: <my-bundle-id>, attribution: developer, using ephemeral configuration, context: NWURLSession (sensitive), proxy fail closed] start The network path itself is healthy (Wi-Fi good, DNS resolves correctly), but the connection is explicitly configured to fail closed if no proxy is present, and no proxy is provisioned for this bundle identifier. The entire failure happens in approximately 18 ms, far too fast for any network round-trip, confirming no traffic ever leaves the device. What I've Verified The entitlement is present in the distribution build The NEURLFilterControlProvider extension loads and returns a valid Bloom filter prefilter (with a tag that round-trips correctly between extension and framework) NEURLFilterManager.setConfiguration(pirServerURL:pirPrivacyPassIssuerURL:pirAuthenticationToken:controlProviderBundleIdentifier:) accepts all four parameters without error Development-signed builds of the same bundle identifier connect successfully to the same PIR server On production-signed builds, zero requests reach the PIR server — failure is purely client-side, before any network activity The Question How does the OHTTP privacy proxy get provisioned for a bundle identifier so that production builds can successfully use NEURLFilter? Specifically: Is there a Capability Request form I need to submit for url-filter-provider? I cannot find one in the Capability Requests section of my developer portal. Should I be running my own OHTTP gateway (for example using swift-nio-oblivious-http), and if so, does Apple then need to provision routing from their OHTTP relay to my gateway URL? Is the OHTTP relay path meant to be automatic once the entitlement is active, and if so, is there a specific activation step I'm missing? Is there any way to verify the current provisioning state for a specific bundle identifier from the developer portal? I can provide the full sysdiagnose and unredacted bundle/server details privately to an Apple engineer if that would help diagnose. I'd prefer to keep them out of a public post. Thanks!

Hi everyone, I'm building an app in Xcode 16.4 with a minimum deployment target of iOS 12. The last time I built with this configuration was November 2025 — that build worked perfectly fine. I'm aware that builds from Xcode 16.4 will no longer be accepted by Apple after April 28, 2026, so I decided to push one final update before that deadline. Here's what I did: Built the app with no changes to build settings Uploaded to TestFlight Tested on iOS 12, iOS 26, and a few other versions — everything looked good Passed App Review Published to the App Store Now users on iOS 12 are reporting that the app crashes immediately on launch. Users on iOS 13-26 are unaffected. We've effectively lost a significant portion of our users overnight. We'd really like to restore functionality for them before April 28 — after that we plan to raise the minimum deployment target anyway. There are no crash logs available, as the app appears to never reach application code at all. Below are the relevant logs from Console.app: default 16:33:49.012231+0400 SpringBoard Bootstrapping MY_BUNDLE_ID with intent foreground-interactive error 16:33:49.021533+0400 SpringBoard [MY_BUNDLE_ID] Bootstrap failed with error: <NSError: 0x280f59aa0; domain: BKSProcessErrorDomain; code: 1 (bootstrap-failed); reason: "Failed to start job"> error 16:33:49.021748+0400 SpringBoard Bootstrapping failed for <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> with error: Error Domain=BKSProcessErrorDomain Code=1 "Unable to bootstrap process with bundleID MY_BUNDLE_ID" UserInfo={NSLocalizedDescription=Unable to bootstrap process with bundleID MY_BUNDLE_ID, BKSProcessExitReason=0, NSLocalizedFailureReason=Failed to start job, NSUnderlyingError=0x280f58780 {Error Domain=NSPOSIXErrorDomain Code=3 "No such process" UserInfo={NSLocalizedFailureReason=The process failed to exec, NSLocalizedRecoverySuggestion=Consult /var/log/com.apple.xpc.launchd/launchd.log for more information, NSLocalizedDescription=Unable to get valid task name port right for pid 241}}, BSErrorCodeDescription=bootstrap-failed} default 16:33:49.021934+0400 SpringBoard Adding: <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> default 16:33:49.022111+0400 SpringBoard <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> exited. default 16:33:49.023325+0400 SpringBoard Removing: <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> default 16:33:49.039576+0400 assertiond Submitting new job for "MY_BUNDLE_ID" on behalf of <BKProcess: 0x100d119f0; SpringBoard; com.apple.springboard; pid: 48; agency: SystemShell; visibility: foreground; task: running> default 16:33:49.039982+0400 assertiond Submitted job with label: UIKitApplication:MY_BUNDLE_ID[0xed03][58] error 16:33:49.040128+0400 assertiond Unable to obtain a task name port right for pid 241: (os/kern) failure (0x5) error 16:33:49.040286+0400 assertiond Failed to start job with error <NSError: 0x100c3f180; domain: NSPOSIXErrorDomain; code: 3; reason: "The process failed to exec"> { description = "Unable to get valid task name port right for pid 241"; failureReason = "The process failed to exec"; recoverySuggestion = "Consult /var/log/com.apple.xpc.launchd/launchd.log for more information"; Has anyone encountered this recently? Any help would be greatly appreciated. P.S. I tried rebuilding from scratch without any code changes and uploading a fresh build to TestFlight — but now it won't even launch from TestFlight on iOS 12.

I have submitted my application for one month, but it is still awaiting review. So I resubmitted it for review. I am the owner of this application and I also requested an expedited review. I also consulted Apple and contacted them several times through the "Contact Us" option, but the reply always said that it would take some time. Therefore, we can only seek help from the review staff here. Application ID: 675550806

iPhone 14(iOS 26.4) MacBook Air M4 (macOS 26.4) When I mirror with iPhone on Mac, the enter key is always pressed automatically uncontrollably, causing the search bar and other related scenes to fail. And AirPods Pro 2nd generation will switch between Mac and iPhone by mistake, when iPhone and Mac are not playing

I’m developing an iOS application and aiming to install a PKCS#12 (.p12) certificate into the com.apple.token keychain access group so that Microsoft Edge for iOS, managed via MDM/Intune, can read and use it for client certificate authentication. I’m attempting to save to the com.apple.token keychain access group, but I’m getting error -34018 (errSecMissingEntitlement) and the item isn’t saved. This occurs on both a physical device and the simulator. I’m using SecItemAdd from the Security framework to store it. Is this the correct approach? https://developer.apple.com/documentation/security/secitemadd(::) I have added com.apple.token to Keychain Sharing. I have also added com.apple.token to the app’s entitlements. Here is the code I’m using to observe this behavior: public static func installToTokenGroup(p12Data: Data, password: String) throws -> SecIdentity { // First, import the P12 to get the identity let options: [String: Any] = [ kSecImportExportPassphrase as String: password ] var items: CFArray? let importStatus = SecPKCS12Import(p12Data as CFData, options as CFDictionary, &items) guard importStatus == errSecSuccess, let array = items as? [[String: Any]], let dict = array.first else { throw NSError(domain: NSOSStatusErrorDomain, code: Int(importStatus), userInfo: [NSLocalizedDescriptionKey: "Failed to import P12: \(importStatus)"]) } let identity = dict[kSecImportItemIdentity as String] as! SecIdentity let addQuery: [String: Any] = [ kSecClass as String: kSecClassIdentity, kSecValueRef as String: identity, kSecAttrLabel as String: kSecAttrAccessGroupToken, kSecAttrAccessible as String: kSecAttrAccessibleAfterFirstUnlock, kSecAttrAccessGroup as String: kSecAttrAccessGroupToken ] let status = SecItemAdd(addQuery as CFDictionary, nil) if status != errSecSuccess && status != errSecDuplicateItem { throw NSError(domain: NSOSStatusErrorDomain, code: Int(status), userInfo: [NSLocalizedDescriptionKey: "Failed to add to token group: \(status)"]) } return identity }

Hello, I released a new build for my app but it fails to run on iOS 12.5.8 (tested on iPad Air, iPhone 6, iPhone 5s). The launch storybard is shown, then the app stops abruptly. There is no crash log. It runs fine on iOS 13 or higher. Xcode 26.3 was showing a call stack (something with UIView) that did not include any app code. Now with Xcode 26.4 (and its new command line tools) there is an info popup with a debug metadata dump. However, I don’t intend to focus on Xcode here because it officially does not support iOS 12. It’s ok if I cannot debug, I just want the app to run on the device like the previous build did. Since there is no crash log, and the console is showing a bootstrap error, I believe my app code has not been executed and is therefore not at fault. Build 674 released on 23-Mar-2026: worked fine on iOS 12, built with Xcode 26.3 Build 675 released on 29-Mar-2026: Bootstrap error as described, with both Xcode 26.3 and 26.4 Deployment target = 12.4 Tried Instruments but it fails as soon as I hit record. In the console I found BKSProcessErrorDomain code 1. Here on the forum I found a post where the cause was no internet access but my device does have internet access. I made only very little code changes to my app between 674 and 675, no storyboard updates. I get the impression the loader does not even begin to execute my code. At this point I wonder if: some certificate has expired (see release dates above), or if something is incompatible in my main storyboard (though I did not change anything there), or the device ran out of memory (1 GB) Note: The app has 4 targets: main app target framework AU app extension intents app extension Thanks, Sven PS: Misclicked subtopic which should have been General (sorry). Here’s the redacted console excerpt: standard 22:21:13.187990+0200 SpringBoard Evaluate: making new window key: <SBMainSwitcherWindow: 0x159e5f640>, for reason: push standard 22:21:13.188303+0200 SpringBoard Removed: <FBUIApplicationSceneDeactivationAssertion: 0x283c9dfe0; reason: systemAnimation; all scene levels; hasPredicate: NO> standard 22:21:13.198299+0200 assertiond Submitting new job for "com.example.app" on behalf of <BKProcess: 0x141d15d50; SpringBoard; com.apple.springboard; pid: 48; agency: SystemShell; visibility: foreground; task: running> standard 22:21:13.198867+0200 SpringBoard Bootstrapping com.example.app with intent foreground-interactive standard 22:21:13.201136+0200 assertiond Submitted job with label: UIKitApplication:com.example.app[0x1d9f][58] standard 22:21:13.201244+0200 SpringBoard Icon touch canceled (tap gesture may still succeed): <private> fehler 22:21:13.201329+0200 SpringBoard [com.example.app] Bootstrap failed with error: <NSError: 0x283e4cd80; domain: BKSProcessErrorDomain; code: 1 (bootstrap-failed); reason: "Failed to start job"> fehler 22:21:13.201421+0200 SpringBoard Bootstrapping failed for <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> with error: Error Domain=BKSProcessErrorDomain Code=1 "Unable to bootstrap process with bundleID com.example.app" UserInfo={NSLocalizedDescription=Unable to bootstrap process with bundleID com.example.app, BKSProcessExitReason=0, NSLocalizedFailureReason=Failed to start job, NSUnderlyingError=0x283e4c5d0 {Error Domain=NSPOSIXErrorDomain Code=3 "No such process" UserInfo={BKLaunchdOperation=launch_get_running_pid_4SB, NSLocalizedDescription=Unable to get pid for label UIKitApplication:com.example.app[0x1d9f][58], BKLaunchdJobLabel=UIKitApplication:com.example.app[0x1d9f][58], NSLocalizedFailureReason=No such process}}, BKSProcessJobLabel=UIKitApplication:com.example.app[0x1d9f][58], BSErrorCodeDescription=bootstrap-failed} standard 22:21:13.201507+0200 SpringBoard Adding: <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> standard 22:21:13.201606+0200 SpringBoard <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> exited. standard 22:21:13.202002+0200 assertiond Unable to get pid for 'UIKitApplication:com.example.app[0x1d9f][58]': No such process (3) fehler 22:21:13.202145+0200 assertiond Failed to start job with error <NSError: 0x141e1aba0; domain: NSPOSIXErrorDomain; code: 3; reason: "No such process"> { description = "Unable to get pid for label UIKitApplication:com.example.app[0x1d9f][58]"; failureReason = "No such process"; userInfo = { BKLaunchdJobLabel = UIKitApplication:com.example.app[0x1d9f][58]; BKLaunchdOperation = launch_get_running_pid_4SB; } } standard 22:21:13.202238+0200 assertiond Deleted job with label: UIKitApplication:com.example.app[0x1d9f][58] standard 22:21:13.202804+0200 SpringBoard Removing: <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> standard 22:21:13.221231+0200 SpringBoard Application process state changed for com.example.app: <SBApplicationProcessState: 0x28336f0a0; pid: -1; taskState: Not Running; visibility: Unknown> standard 22:21:13.221566+0200 SpringBoard Process exited: <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> -> <FBApplicationProcessExitContext: 0x283e37b10; exitReason: (none); terminationReason: (none)> { stateAtExit = <FBProcessState: 0x28337c760; pid: -1; taskState: Unknown; visibility: Unknown>; }

My app has the phrase GPT in it as it is an app that runs private open source offline AI models (for free) on the iPhone. The app is called LiberaGPT. I have released my first version without issue and it was distributed to the Mainland China store. I made some small updates including accessibility features etc and released my next version. The reviewer is now accusing my app of using OpenAI's ChatGPT even though they can see the source code and my app is entirely offline using local AI inference rather than cloud inference. It is now a back and forth of me explaining over and over that my app is nothing to do with ChatGPT that GPT is a term used in the field of AI to describe certain types of LLM's and is nothing to do with 'ChatGPT' which is a brand. It is like saying you can't say 'AI' because of 'OpenAI' this makes no sense. I am literally at my witts end as I've poured so much time and energy into developing this app and it is now available on the app store but they won't let me update it and are essentially gaslighting me by saying that the term GPT cannot be used because it belongs to ChatGPT when it doesn't. There are numerous apps (including my previous version which ironically is live in the store that contain GPT in the app name without issue. GPT stands for 'Generative Pre-trained Transformer' and is a description of a technology not a brand. Is there anything I can do? No matter how many times I clarify, provide evidence, try to explain my position, they keep just copy and pasting the same response over and over that my app cannot be published in mainland China as OpenAI's ChatGPT is banned there and that my app is using OpenAI's ChatGPT in the software WHICH IT ISNT!!! THERE IS NO CLOUD DATA CONNECTION. Any help would be greatly appreciated, hopefully I don't pull all my hair out. Thanks, Stephen

‌Using Xcode 26, the built package encounters device compatibility issues — while it installs successfully on supported iPhone devices, but it crashes immediately upon launch and cannot run normally.‌‌In previous versions of Xcode, the same "minimum deployment" setting in the project did not cause such compatibility issues.‌ The app built with Xcode 26 shows the following behavior when installed and tested on various devices:‌ iPhone6p iOS12.5.8 fails to run 2.iPhone6 iOS11 fails to run 3.Iphone6 iOS12.5.7 fails to run 4.iPhone7 iOS12.1.3 ok 5.iPhoneX iOS 12.2 ok 6.iphone6s plus iOS10.3.1 ok 7.iphoneXS. iOS 12.1.4 ok 8.iPhone11 iOS 13.6.1 ok 9.iPhone7. iOS 13.7 ok We have tested and found that an iPhone 6s Plus running iOS 10.3.1 can normally run the app. We would like to know whether apps built with Xcode 26 are inherently incompatible with iPhone 6 and older devices. Has Xcode 26’s underlying build environment removed full support for the A8 chip, resulting in binary files containing instructions or memory models that older devices cannot parse? ‌Looking forward to your reply‌.

When you use .navigationTransition(.zoom(sourceID: "placeholder", in: placehoder)) for navigation animation, going back using the swipe gesture is still very buggy on IOS26. I know it has been mentioned in other places like here: https://developer.apple.com/forums/thread/796805?answerId=856846022#856846022 but nothing seems to have been done to fix this issue. Here is a video showing the bug comparing when the back button is used vs swipe to go back: https://imgur.com/a/JgEusRH I wish there was a way to at least disable the swipe back gesture until this bug is fixed.

Device: iPhone 13 OS Version: iOS 26.4, iOS 26.5 Summary: The Settings app crashes when accessing the Sandbox account management screen in Developer Settings while the device is offline. Steps to Reproduce: Enable Developer Mode on the device Disconnect from the internet (Wi-Fi and cellular off) Go to Settings → Developer Ensure a Sandbox account is signed in Tap on "Sandbox" Tap on "Manage" Expected Result: The system should either: Open the Sandbox management screen, or Show an error indicating no internet connection Actual Result: The Settings app crashes immediately after tapping "Manage". Reproducibility: Always (100%) when offline Additional Notes: Issue observed on iOS 26.4 and iOS 26.5 Does not occur on iOS 18 May also be present in other iOS 26.x versions Does not occur when the device has an active internet connection

I'm trying to implement Unwanted SMS and Calls reporting in an app I'm doing in my idle time. If I place a UITextField or UITextView inside a ILClassificationUIExtensionViewController, every time I select on such control the extension crashes without any logs. The closet idea I have on why it crashes it has something to do with iOS requesting the dictation feature. I'm using the latest (beta 8 at the time) iOS 16.0 beta on my iPhone 13 pro. Attaching my code here if you want to try for yourself: github

I’m working on an iOS Network Extension where a NEPacketTunnelProviderconfigures a local HTTP/HTTPS proxy usingNEPacketTunnelNetworkSettings.proxySettings. Per NEProxySettings.exceptionList docs: If the destination host name of an HTTP connection matches one of these patterns then the proxy settings will not be used for the connection. However, I’m seeing two distinct issues: Issue A (exception bypass not working): HTTPS traffic to a host that matches exceptionList still reaches the proxy. Issue B (domain-scoped proxy not applied): When matchDomains is set to match a specific domain (example: ["googlevideo.com"]), I still observe its traffic in some apps is not proxied. If I remove the domain from matchDomains, the same traffic is proxied. Environment OS: iOS (reproduced with 26.4 and other versions) Devices: Reproduced with several iPhones (likely iPads as well) Xcode: 26.3 Extension: NEPacketTunnelProvider Minimal Repro (code) This is the minimal configuration. Toggle between CONFIG A / CONFIG B to reproduce each issue. import NetworkExtension final class PacketTunnelProvider: NEPacketTunnelProvider { override func startTunnel( options: [String : NSObject]? = nil, completionHandler: @escaping (Error?) -> Void ) { let proxyPort = 12345 // proxy listening port let settings = NEPacketTunnelNetworkSettings(tunnelRemoteAddress: "8.8.8.8") let proxySettings = NEProxySettings() proxySettings.httpEnabled = true proxySettings.httpsEnabled = true proxySettings.httpServer = NEProxyServer(address: "1.2.3.4", port: proxyPort) // proxy listening address proxySettings.httpsServer = NEProxyServer(address: "1.2.3.4", port: proxyPort) // proxy listening address // CONFIG A: proxy all domains, but exclude some domains // proxySettings.matchDomains can be set to match all domains // proxySettings.exceptionList = ["*.cdninstagram.com", "cdninstagram.com"] // CONFIG B: proxy only a specific domain // proxySettings.matchDomains = ["googlevideo.com"] settings.proxySettings = proxySettings setTunnelNetworkSettings(settings) { error in completionHandler(error) } } } Repro steps Issue A (exceptionList bypass not working) Enable the VPN configuration and start the tunnel with CONFIG A (exceptionList = ["*.cdninstagram.com", "cdninstagram.com"]). Open the Instagram app to trigger HTTPS connections to *.cdninstagram.com Inspect proxy logs: cdninstagram.com traffic is still received by the proxy. Safari comparison: If I access URLs that trigger the same *.cdninstagram.com hosts from Safari, it can behave as expected. When the traffic is triggered from the Instagram app, the excluded host still reaches the proxy as CONNECT, which is unexpected. Issue B (matchDomains not applied for YouTube traffic) Start the tunnel with CONFIG B (matchDomains = ["googlevideo.com"]). Open the YouTube app and start playing a video (traffic typically targets *.googlevideo.com). Inspect proxy logs: googlevideo.com traffic is not received by the proxy. Remove the host from matchDomains and observe that googlevideo.com traffic is received by the proxy. Safari comparison: If I access a googlevideo.com host from Safari while matchDomains = ["googlevideo.com"], it behaves as expected (proxied). In contrast, the YouTube app’s googlevideo.com traffic is not proxied unless I match all domains. Expected Issue A Connections to *.cdninstagram.com in the Instagram app should not use the proxy and should not reach the local proxy server. Issue B With matchDomains = ["googlevideo.com"], traffic to *.googlevideo.com (YouTube video traffic) should be proxied and therefore reach the local proxy. Actual Issue A The local proxy still receives the request as: CONNECT scontent-mad1-1.cdninstagram.com:443 HTTP/1.1 So the bypass does not happen. Issue B With matchDomains = ["googlevideo.com"], I still observe googlevideo.com traffic in the YouTube app that is not delivered to the proxy. When all traffic is proxied, the same traffic is delivered to the proxy.

I’m seeing a regression in Xcode 26.4 where Interface Builder will not allow connecting IBOutlets or IBActions. Symptoms: The usual gutter circle/dot does not appear next to IBOutlet / IBAction in the code editor Because of this, I cannot: drag from storyboard → code drag from code → storyboard The class is valid and already connected to the storyboard (existing outlets work) Assistant Editor opens the correct view controller file Important: The exact same project, unchanged, works perfectly in Xcode 26.3. I can create and connect outlets/actions normally there. ⸻ Environment Xcode: 26.4 macOS: 26.4 Mac Mini M4 Pro 64G Ram Project: Objective-C UIKit app using Storyboards This is a long-running, ObjC, project (not newly created) ⸻ What I’ve already tried To rule out the usual suspects: Verified View Controller Custom Class is correctly set in Identity Inspector Verified files are in the correct Target Membership Verified outlets are declared correctly in the .h file: @property (weak, nonatomic) IBOutlet UILabel *exampleLabel; Opened correct file manually (not relying on Automatic Assistant) Tried both: storyboard → code drag code → storyboard drag Tried using Connections Inspector Clean Build Folder Deleted entire DerivedData Restarted Xcode Updated macOS to 26.4 Ran: sudo xcodebuild -runFirstLaunch Confirmed required platform components installed Reopened project fresh ⸻ Observations In Xcode 26.4 the outlet “connection circles” are completely missing In Xcode 26.3 they appear immediately for the same code Existing connections still function at runtime — this is purely an Interface Builder issue ⸻ Question The gutter circles appearance has always been flaky in Xcode over the 13+ years I've been using it but now with 26.4 they have completely disappeared. Has anyone else seen this in Xcode 26.4, or found a workaround? At this point it looks like a regression in Interface Builder, but I haven’t found any mention of it yet.

Hello everyone, I’m looking for some clarification and advice regarding an unexpected App Review rejection under Guideline 4.1 – Copycats. My app has been live on the App Store since May 2024, and during that time, it has maintained the same core flow, structure, UI, and feature set. There have been no major redesigns or attempts to imitate any other app. Recently, I submitted a new version (v3.2) with only minor changes related to ad logic implementation (no UI/UX changes, no branding changes, no metadata changes). However, this update was rejected with the following reason: “This app or its metadata appears to be misrepresenting itself as another popular app or game…” This has left me quite confused for a few reasons: The app has been approved and publicly available for nearly 2 years There were no significant design or branding changes in this submission The rejection seems unrelated to the actual changes made in this version My questions: Has anyone experienced a situation where an app was flagged as a copycat after being live for a long time? Is it possible that Apple updated their internal policies or comparisons, causing older apps to be re-evaluated? Could this be triggered by similar metadata (keywords, screenshots, descriptions) rather than the app itself? What would be the best way to respond in App Store Connect Resolution Center in this case? I fully respect Apple’s guidelines and have no intention of copying or misleading users. I’d really appreciate any insights or suggestions on how to resolve this properly. Thank you!

I’m developing an app that includes a navigation bar with a centered title and a single right bar button item. I’ve noticed that when both the navigation bar title and the right bar button item’s title are relatively long, the navigation bar title becomes hidden. This issue only occurs on iOS 26. When running the same code on iOS 18, the layout behaves as expected, with both elements visible. Has anyone else experienced this behavior on iOS 26? Is this a known layout change or a possible bug?

Safari on iOS 17, when entering characters into text input box after deleting characters, the layout is off. Here's the HTML: <body> <div id="J001" style="display: inline-block;"> <div id="J001__0" style="display: inline-block;"> <input id="J001__0__input" style="display: inline-block; height: 28px; padding:2px; border:1px solid gray;"></div> <div id="J003__0" style="display: inline-block;"> <button id="J003__0__btn" style="display: inline-block; height:34px;">a</button> </div> </div> </body> Enter "A" into text input box. Delete "A" with the backspace(x). Enter "A" into text input box, the button position will be shifted down. iOS 17 の Safari にて、テキスト入力ボックスで文字を削除した後、文字を入力するとレイアウトが崩れます。 テキスト入力ボックスに「A」と入力します。 バックスペース(x)で「A」を削除します。 テキスト入力ボックスに「A」と入力すると、ボタンの位置が下にずれます。

Hello Apple Developer Community, I'm seeing a persistent crash in my iOS app reported via Firebase Crashlytics. The issue only started appearing on devices running iOS 26.3.0 and above (the crash does not occur on lower iOS versions, and it's unrelated to my app's version number). Key points: My app does NOT use any Text-to-Speech (TTS) features whatsoever. No AVSpeechSynthesizer, no Speech framework, no related APIs called from our code. My app is primarily written in Objective-C (with some Swift components possibly via dependencies). The crash stack is entirely within Apple's private TextToSpeech framework, specifically in ausdk::BufferAllocator::instance(). I suspect it might be indirectly triggered by a third-party ad SDK (e.g., Google Mobile Ads, AppLovin, etc.) that could be loading or interacting with accessibility features in the background — but this is just a hypothesis, as I have no direct evidence yet. Here is one representative crash log: Crashed: com.apple.root.user-initiated-qos.cooperative 0 TextToSpeech 0x6bb00 ausdk::BufferAllocator::instance() + 99800 1 TextToSpeech 0xf8c60 ausdk::BufferAllocator::instance() + 677688 2 TextToSpeech 0xf8c60 ausdk::BufferAllocator::instance() + 677688 3 TextToSpeech 0x1a0b9c ausdk::BufferAllocator::instance() + 1365620 4 libswift_Concurrency.dylib 0x628b4 swift::runJobInEstablishedExecutorContext(swift::Job*) + 288 5 libswift_Concurrency.dylib 0x63d28 swift_job_runImpl(swift::Job*, swift::SerialExecutorRef) + 156 6 libdispatch.dylib 0x13f48 _dispatch_root_queue_drain + 364 7 libdispatch.dylib 0x146fc _dispatch_worker_thread2 + 180 8 libsystem_pthread.dylib 0x137c _pthread_wqthread + 232 9 libsystem_pthread.dylib 0x8c0 start_wqthread + 8 The crash occurs on a background cooperative queue (Swift Concurrency). Questions: Has anyone else seen crashes inside ausdk::BufferAllocator::instance() in TextToSpeech on iOS 26.3.0+ even without using TTS in their app? Could a third-party ad SDK be causing the TextToSpeech framework to load unexpectedly (e.g., via accessibility preloading)? Is this a known bug in iOS 26's Spoken Content / Speak Selection features? Any workarounds or fixes from Apple? Any insights, similar reports (especially from Objective-C based apps), or advice would be greatly appreciated! Thanks!

Hello, Our App Clip has recently gone live, and I’ve been testing the App Clip card across different device languages. I’ve noticed that while the action button text (e.g., “Open”) is localized automatically, the title and subtitle on the App Clip card are not being localized. Currently, they always appear in English. While configuring the advanced App Clip experience in App Store Connect, I was only able to select a single language (English). I attempted to create additional App Clip experiences for other languages, but encountered an error stating that the same App Clip Experience URL cannot be reused. Given that our users are distributed globally, I would like to understand: How can we localize the App Clip card (title and subtitle) for multiple languages while using the same App Clip Experience URL? Is there a recommended approach to support localization for a single App Clip experience across different regions/languages? Any guidance or best practices would be greatly appreciated. Thank you.

The appeals process for when your Apple Developer account is in Pending Termination status doesn't work. The re-instate developer account form is very clear it shouldn't be used if it's pending. But the form for "I would like to appeal an app rejection or app removal" which is the correct form for pending state. Gives the error "There are no apps associated with this team." we do have apps associated. There could be thousands of developer accounts that weren't able to file an appeal correctly because of this bug. "If you would like to appeal this termination decis ion to the App Review Board, you must do so within 30 calendar days. When submitting your appeal, be sure to select "I would like to appeal an app rejection or app removal" from the drop-down menu on the Contact the App Review Team page and provide a written statement that includes the following:" Apple is very clear which to use.